If you like heating with wood, you can keep wood as your fuel and let the thermostat run the heat. The AutoPellet burns wood pellets to heat water. That water carries heat to your baseboards, panel radiators or radiant floors. It can also heat an indirect hot-water tank for showers and sinks.
A delivery truck fills the bulk bin through a pipe outside. In the vacuum-fed system shown above, suction carries pellets from storage to the small hopper on the boiler. A separate screw auger meters them into the burner from underneath.
Light and control the fire
An electric igniter starts the fire on the burner plate. Fresh pellets rise into the flame from below. A combustion sensor monitors the burn, and the draft fan adjusts the airflow as the boiler changes output to match demand.
Transfer the heat
Hot gases pass through the heat exchanger on their way to the flue. Heat crosses the metal into the boiler water. When a zone calls, a circulator moves heated water through that part of the building and returns cooler water to the boiler.
What takes the daily work out of wood heat?
With the bottom-fed burner, incoming pellets gradually push spent ash off the edge of the plate. The boiler moves ash into a removable box and compacts it there. A cleaning mechanism sweeps the heat exchanger tubes daily so ash deposits don’t insulate the surfaces that heat the water.
On a bulk-fed installation, you arrange pellet deliveries, empty the ash box when it fills and schedule a professional cleaning once a year. How often the box fills depends on how much fuel you burn and the ash content of those pellets. See how bulk storage fits into a boiler room.
What we look for on an installation
We start with the rooms you’re trying to heat. A panel radiator and a radiant slab can share a boiler, but they may need different water temperatures. We look at the heat loss, the existing emitters and the way the zones call before we choose the boiler size and lay out the piping.
Then we walk the room. Can the driver reach the fill pipes? Can you pull the ash box straight out once the piping is in? Can we reach the top of the exchanger for the annual cleaning? Those details make a difference every winter. Explore our hydronic layouts.
Built by Maine Energy Systems
Maine Energy Systems builds the AutoPellet in the United States under license from Austria’s ÖkoFEN. MESys is the U.S. contact for model specifications and equipment information. We’ve installed and serviced these boilers since 2011.